Pelatihan SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

INTRODUCTION Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

SCADA has traditionally meant a window into the process of a plant and / or a method of gathering of data from devices in the field. Today, the focus is on integrating this process data into the actual business, and using it in real time. In addition to this, today’s emphasis is on using Open Standards, such as communication protocols (eg IEC 60870, DNP3 and TCP/IP) and ‘off-the-shelf’ hardware and software, as well as focusing on keeping the costs down. PLCs continue to gain in popularity. In fact, many SCADA applications use PLCs as the RTU of choice, when communicating with field devices. This comprehensive course covers the essentials of SCADA and PLC systems, which are often used in close association with each other.

OBJECTIVE Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

After completing this course, the participants should be able to understand the concepts of SCADA Systems, build and configure the MTU and RTU modules, program the MTU and RTU, use sequential and PID controller implementation of MTU and RTU. Input/Output communication to get RTU data, set up polling and exception report of MTU/RTU, link the TU/RTU with Supervisory Computer and use Human Machine Interface (HMI) to optimize the operation of SCADA System.

OUTLINE Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

1. Concept of SCADA System
2. Software and Hardware of SCADA System
3. MTU/RTU Configuration Set-up
4. MTU/RTU Communication
5. MTU/RTU Ladder Logic Programming
6. Logic and Sequential Programming
7. MTU/RTU PID controller Programming
8. MTU/RTU Data Logging
9. MTU/RTU Exception Reporting
10. MTU/RTU System Redundancy
11. Input/Output Server and HMI System
12. HMI Operation and Programming
13. Comprehensive Practice

METHODES Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

1. Tutorial
2. Discussion
3. Practice

INSTRUCTOR Training SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION): PRINCIPLES, HARDWARE SYSTEM, OPERATION & PROGRAMMING

1. MH Sapto Widodo, M.Sc. and Hadi Prasetyo, MT
2. MH Sapto Widodo, M.Sc was born in June 9th 1957. He got his education of master of science in electrical engineering, System Design and Technology, Fachhochschule Darmstadt, Germany. He also has followed some courses for improving his competencies in Indonesia and abroad. He is head of electrical department at P4TK BMTI Bandung atau TEDC Bandung(technical education development center) and he also as lecturer at the department. He has experiences in some consultants. Some training sectors related to his fields are as follows Electrical & Mechatronic, including these related fields: Electrical

Jadwal Pelatihan bandung-training.com 2023 :

Batch 1 : 24 – 26 Januari 2023

Batch 2 : 20 – 23 Maret 2023

Batch 3 : 15 – 17 Mei 2023

Batch 4 : 17 – 19 Juli 2023

Batch 5 : 25 – 27 September 2023

Batch 6 : 7 – 9 November 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bandung :

• Yogyakarta, Hotel Dafam Malioboro
• Jakarta, Hotel Amaris Tendean
• Bandung, Hotel Golden Flower
• Bali, Hotel Ibis Kuta
• Surabaya, Hotel Amaris(6.00.000 IDR / participant)
• Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

• Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
• Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Bandung :

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
2. FREE Akomodasi Peserta ke tempat pelatihan .
3. Module / Handout
4. FREE Flashdisk
5. Sertifikat
6. FREE Bag or bagpackers (Tas Training)
7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
8. 2xCoffe Break & 1 Lunch, Dinner
9. FREE Souvenir Exclusive
10. Training room full AC and Multimedia