Pelatihan SCADA System: Application and Practical Design

Training SCADA System: Application and Practical Design

DESCRIPTION Training SCADA System: Application and Practical Design

This Supervisory Control and Data Acquisition (SCADA) System Training program is designed to give good understanding and knowledge on SCADA System architecture and practical design, including skill enhancement of installing-programming of Master Terminal Unit (MTU, remote terminal Unit (RTU), MTU/RTU communication, MTU/RTU Port List as well as understanding of MTU/RTU software features, MTU/RTU program down load and up load, Reading and Writing module Data of MTU/RTU, SCADA system communication protocol, MTU/RTU redundancy, MTU/RTU programming for logic and PID Regulatory control. Polling and acceptation report, Input/output server and Human Machine Interface (HMI). The focus is this course is bring the participants learning about SCDA system philosophy by hands of practice directly on the integration of MTU and RTU with SCDA system software to collect geographically distributed facility data and to optimize the management of asset

WHAT YOU WILL LEARN IN Training SCADA System: Application and Practical Design

After completing this course, the participant should be able to understand the concept of SCADA system architecture and application design, build and configure the MTU and RTU modules as well, program the MTU and RTU, use sequential and PID controller implementation of MTU/RTU, Input/Output communication to get RTU data, set -up polling and exception report of MTU/RTU, link the MTU/RTU with supervisory computer and use Human Machine Interface (HMI to optimize the operation of SCADA

COURSE OUTLINE Training SCADA System: Application and Practical Design

1. SCADA System Overview
2. Typical SCADA System Applications
3. Master Terminal Unit (MTU)
4. Remote Terminal Unit (RTU) Hardware
5. MTU/ RTU System Software and Configuration Set

2. Communication Protocol and Programming
3. Ladder Logic Programming
4. Logic and Sequential Programming
5. Polling and Data Logging
6. PID Controller Programming
7. Exception Reporting
8. System Redundancy
9. Input /Output Sever (Driver)
10. Human Machine Interface (HMI)
11. Real Time /Historical Trending
12. Dynamic Data Exchange (DDE & OPC Technology
13. Historical Database System
14. Multi Protocol/ Multi Brand Instrument System Integration.
15. Use Of GSM/ GPRS in SCADA System
16. Link to Office Applications
17. Discussion and Closing

WHO SHOULD ATTEND Training SCADA System: Application and Practical Design

The following category of professionals should attend:

1. Engineers (Production, Instrumentation, Process, Electrical, Maintenance, Design/ Construction, Facilities, Maintenance, Telecommunication and Information Systems/ IT)
2. Supervisors and Superintendents who support the field SCADA systems
3. Team Leaders who support the SCADA systems
4. Managers who responsible for SCADA systems.
5. Everybody who wish to broaden their knowledge on this course subject

METHOD Training SCADA System: Application and Practical Design

1. Presentation
2. SCADA System Simulation
3. King fisher master terminal Unit and remote Terminal units, Ethernet Network or radio modern computer

Instructor Training SCADA System: Application and Practical Design

Dr. Ir. Edi Leksono. M.Eng  And Team

1. Ir. Edi Leksono, M.Eng is currently a senior professor of Engineering Physics at ITB and is a professional instructor with over 15 years experience in training and consulting. Since 1984, he has consulted and taught countless short courseses for various major industries such as PT. Krakatau Steel, PT. Petrokimia Gresik, PT. Pupuk Kaltim, PT. Semen Gresik, PT. INCO Indonesia, PT. Tambang Timah Bangka, Pertamina, Caltex Pacific Indonesia, TOTAL Indonesie, Maxxus, Unocal Indonesia, ConocoPhillips Indonesia and more.

Mr. Edi received his M.Eng. in Control Engineering from Tokyo Institute of Technology and his Ph.D. in Electrical Engineering from Keio University, Japan.

Jadwal Pelatihan bandung-training.com 2023 :

Batch 1 : 24 – 26 Januari 2023

Batch 2 : 20 – 23 Maret 2023

Batch 3 : 15 – 17 Mei 2023

Batch 4 : 17 – 19 Juli 2023

Batch 5 : 25 – 27 September 2023

Batch 6 : 7 – 9 November 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bandung :

• Yogyakarta, Hotel Dafam Malioboro
• Jakarta, Hotel Amaris Tendean
• Bandung, Hotel Golden Flower
• Bali, Hotel Ibis Kuta
• Surabaya, Hotel Amaris(6.00.000 IDR / participant)
• Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

• Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
• Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Bandung :

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
2. FREE Akomodasi Peserta ke tempat pelatihan .
3. Module / Handout
4. FREE Flashdisk
5. Sertifikat
6. FREE Bag or bagpackers (Tas Training)
7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
8. 2xCoffe Break & 1 Lunch, Dinner
9. FREE Souvenir Exclusive
10. Training room full AC and Multimedia