Training Alignment And Balancing In Rotating Equipment

Pelatihan Alignment And Balancing In Rotating Equipment

Misalignment and unbalance are two major causes of vibration in rotating equipment, vibration that means increased maintenance and reduced machine life. With proper alignment and balancing programs, reductions in maintenance and operating costs can easily reach into six figures per year. When shafts are misaligned, forces are generated that can produce stresses on the rotating and stationary components. Even when couplings do not fail from the stresses produced by gross misalignment, bearings and seals will most certainly fail under these conditions. In extreme cases of misalignment, even the shafts may fracture and break. Out-of-balance machine components are a principal cause of machinery vibration. The condition often is caused by less-than-perfect manufacturing, and it is routine for rotating equipment, reciprocating machines and vehicles. Mass balancing may be necessary if an operation or product requires quiet operation, high speeds, long bearing life, operator comfort, controls free of
malfunctioning or a quality feel. There are three types of balancing machines: static balancing stands, hard bearing machines, and soft bearing machines. Static balancing stands do not require spinning up and can correct for static or single-plane unbalance only. They feature low cost and safe operation.

TRAINING MATERIAL OUTLINE :
1. Mechanical Equipment Overview
2. Rim and Face Alignment
3. Reverse Dial Indicator Alignment
4. Determine Balance Weight
5. Combine Balance Weights
6. Single Plane Balancing
7. Dual Plane Balancing
8. Laser Alignment & Balancing

TRAINING BENEFIT :
1. Participant can develop, implement and supervise the alignment process
2. Economize the time, money and company’s resources by implementing appropriate alignment and balancing
3. Prevent the company’s equipment and tools from damage and make the machine’s living period longer
4. Decrease the down time
5. Increase the profit

Pembicara / Fasilitator

Ir. Deddy Nugraha

Participants :

Plant and Pipeline Operators, Supervisors, Engineers and Manager.

Jadwal Pelatihan bandung-training.com tahun 2021:

Batch 1 : 24 – 26 Januari 2023

Batch 2 : 20 – 23 Maret 2023

Batch 3 : 15 – 17 Mei 2023

Batch 4 : 17 – 19 Juli 2023

Batch 5 : 25 – 27 September 2023

Batch 6 : 7 – 9 November 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bandung :

• Yogyakarta, Hotel Dafam Malioboro
• Jakarta, Hotel Amaris Tendean
• Bandung, Hotel Golden Flower
• Bali, Hotel Ibis Kuta
• Surabaya, Hotel Amaris(6.00.000 IDR / participant)
• Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

• Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
• Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Training di Bandung :

1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
2. FREE Akomodasi Peserta ke tempat pelatihan .
3. Module / Handout
4. FREE Flashdisk
5. Sertifikat
6. FREE Bag or bagpackers (Tas Training)
7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
8. 2xCoffe Break & 1 Lunch, Dinner
9. FREE Souvenir Exclusive
10. Training room full AC and Multimedia