DRILLING AND WELL CONSTRUCTION
Drilling and well construction (probably one of the most expensive features of a geothermal direct use project) is often the least understood. This training will provides the basics of Equipment and methods used for drilling and completion of geothermal wells. It provides data needed by architects, engineers, and consultants to assist them in specification writing, selection of contractors, and drilling and completion inspection.
Most direct use geothermal wells can be drilled using conventional water well technology and equipment. Most of the wells will produce water at temperatures less than boiling and without artesian flow at the surface; however, some will be hotter or will flow. Blowout preventers and other sophisticated safety equipment are not usually required; however, this does not mean that there are not significant Safety considerations that should be addressed. Many of the wells have water above 140 0 F and this will scald. Public and drilling crew safety must be ensured. The cementing portion may appear to be overly detailed and long. However, the author’s view is that, all too often, Cementing is considered simply as a means of plugging up the annulus between the casing and borehole wall. Little attention is paid to methods and materials, and a poor cement job is the result. This can result in lost production zones, cold water leaking into production zones, geothermal water leaking into freshwater zones, and reduced useful well life. Also, in view of the increasing awareness and concern about inter-zonal Migration and possible fresh water aquifer contamination, proper cementing is of increasing importance.
COURSE OUTLINE
1.Drilling Equipment
- Cable Tool
- Rotary Drilling
- Other Thypes of rotator drilling
- Downhole harmer
- Reverse circulation
- Drill through casing driver
- Dual tube reverse circulation
2.Core Drilling
3. Directional Drilling
4Drilling Fluids
- Long Circulation
- Drilling Muds
- Density
- Viscosity
- Sand content
- Filter cake
- Gelling
- Lost circulation materials
- Recognizing geothermal zones
5. Polymer fluids
6. Air based Fluids
7. Plumbness and Alignment
- Well Design
- Casing Materials
- Grouting and Cementing
- Blow out Prevention Equipment
- Injection wells
- Well Specifications
- BID sheets
- Well Costs
PARTICIPANTS TRAINING
Senior operational and engineering personnel involved in drilling / workover operations; OIMs, Drilling Superintendents, Drilling Engineers, Drilling Supervisors.
Jadwal Pelatihan bandung-training.com tahun 2021:
Batch 1 : 24 – 26 Januari 2023
Batch 2 : 20 – 23 Maret 2023
Batch 3 : 15 – 17 Mei 2023
Batch 4 : 17 – 19 Juli 2023
Batch 5 : 25 – 27 September 2023
Batch 6 : 7 – 9 November 2023
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan di Bandung :
- Yogyakarta, Hotel Dafam Malioboro
- Jakarta, Hotel Amaris Tendean
- Bandung, Hotel Golden Flower
- Bali, Hotel Ibis Kuta
- Surabaya, Hotel Amaris(6.00.000 IDR / participant)
- Lombok, Hotel Jayakarta
Investasi Pelatihan tahun 2019 ini :
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
- Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Training di Bandung :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE Akomodasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia
